what other tools do u need to have when u have a motorcycle?
I just got my first bike ninja 250ex, and I dont know what other tools I need to take care my bike, from What I know I should have the cover for my bike for when I park it outside, and…. I dont know u guys tell me~
Like this post? Subscribe to my RSS feed and get loads more!
- RSS feed for comments on this post
Jun 26, 2010 in
Cars FAQs
6 comments
SignPimp on June 26, 2010 at 2:42 am
No one mentioned the obvious. Your Ninja 250 uses METRIC tools only. The tools that come in the on board tool bag will take care of 98% of the bolts on your bike. However, if you want things to be easier, get a decent socket set (metric) or go down to your local bike shop and buy some Motion Pro T-handle sockets. They make it much easier to work on your bike. The most common are 10, 12, 14, and 17mm. You will need a 16mm for your spark plug, but it’s best to use the spark plug socket that comes with that bike. It has a far better reach than anything else. Like other people mentioned, get an accurate tire pressure gauge and a good size adjustable wrench for loosening the rear wheel for chain adjustment.
Scooter Great Grandson of Thor on June 26, 2010 at 2:42 am
Get some dog bone wrenchs.
Firecracker . on June 26, 2010 at 2:42 am
Some make do with just a cell phone…
bluff mike on June 26, 2010 at 2:42 am
If the dealer is going to do the maintenance, then all you need is a tire pressure gauge. Low tires can cause handling problems and premature wear.
If you’re going to maintain the bike then you’ll need a drip pan and funnel to use when you change oil. I use a tool like this to handle the oil filter
http://www.casporttouring.com/store/graphics/00000001/bbp_4-201.jpg
I have a tool, called a MityVac, used to change hydraulic fluid in the brake and clutch.
http://www.zpower.com.au/catalog/images/MityvacBrakeBleeder.jpg
All the regular tools you need should be in your bike’s tool bag. Your owners manual will tell you what you need to use them on.
Tim D on June 26, 2010 at 2:42 am
The best tool you can have is a torque wrench, as long as you set the torque correctly you cannot overtighten (or under-) a bolt – it will save you from the very painful experience of rebuilding or fitting a part only for a bolt to break or stretch. With that you will need a socket set, set of spanners (metric), allen keys, screwdrivers (flathead and crosshead), pliers and a feeler gauge. A magnetic tray can be useful to keep fasteners in (and the oil catcher is a good tip).
guardrailjim on June 26, 2010 at 2:42 am
Tire pressure gauge
Chain lube